Help, Intake manifold vacuum seals?

[Rippin6Gears]

Looking to replace my broken plastic seals that are supposed to hold the two vacuum lines into the intake manifold, is there any "help" package or auto parts store that sells them? Any where to buy them or their actual real name? Thanks!

 

[Rippin6Gears]

Also found the valve cover vacuum rubber gone as well... Need to source these too...

 

[cclngthr]

They should be available at Oreillys or autozone, Got my PVC valve cover hose ends in the help section. Think the others might be there too.
\

 

[Beans]

Junkyard is your best bet. I have the valve cover hose if you need it, let me know if it's the front or rear.

 

[rbls4ever]

those retainers just hold the line in the manifold.... there is an o-ring under it that does the sealing. if your retainers are broken just slip a new correct size or possibly slightly bigger o-ring on the vaccum connector and stuff it in there.

 

[Rippin6Gears]

(Untitled)

Well thanks rbls4ever... Neither of my two Intake manifolds had orings in either port. Good to know!