Replacing Wiper Motor

[intravino]

Hi,



I've been tolerating my wiper motor for the last 2 years with problems, now I got these bad electric noise and bearing noise. Anyways, I decided it was time, I took out the cowl vent cover and I had a hard time taking out the motor from the linkage arm. I used this guide to help me:

http://www.autozone.com/repairguides...96b43f80cadd47

Ok, my question is:

When I get the new motor (6 pins), how will matchmark the linkage arm to the new motor?

I did have to move the position of the motor (with the switch on the steering wheel) to give me more place to work on.

I did mark the old motor but how will I align the new motor with the mark on the linkage arm ?

I will get a rebuilt motor, so I will have to return the old one.



Thanks,

 

[svttour]

Or you can buy a complete assembly from me. I believe you live in Canada iirc. I know we've done business in the past... send me a pm.