If this is your problem nothing electrical will work with the blower system. Is your fuse holder melting? When I tried to remove the 30 amp fuse it was semi-welded to the fusebox. When I got the fuse out with a pair of pliers it was messed up. The hot (live) side is what was melting on mine. I don't have any pictures or any way to get one on the web since I am away from home right now. I used a scotch-lock for 10-12 gauge wire and tapped the 60 amp live feed going into the fuse box and ran a 12 gauge wire, with an external fuseholder with a male spade plug on it into the feed side where the fuse used to be. You can buy the holder at O'Reilly AP. Before I put the jumper in I had to wiggle the fuse to get the blower to come on.
