Originally posted by DemonSVT:
The T3 in question flows about 320cfm at 15psi. (I have the compressor map btw) That wouldn't even break 200 wheels through the ATX. I'm not saying it wouldn't make life much more liveable but you are never going to get remotely close to 300 wheels with it. With nearly any T3 actually.

The entire point I was trying to make is you just don't go throwing things together haphazardly. (well at least shouldn't ) You should do some homework.

You had one very good and clear point in your post.

"Everything's speculation until you look at a compressor map."

I couldn't agree more. In fact I even stated it discreetly myself in the post you quoted didn't I. Another point of my post.



Okay, okay, you know compressor maps, and I did notice that. Hmmm, I don't know what to say other than, on a much more poorly flowing 2.3T can do 280 to the wheels or slightly better with a T3. It's certainly not the same thing though, but I happen to believe that if it works it works, you can only find out what's best by tryin it yourself.