Sorry for the multiple posts it wouldn't let me post more than 5 per post and my phone was sometimes only allowing 1 pic per post... But the "description attached to photo" is as follows....
Cracked rear black bumper. Green pass side skirt no jpcs green front bumper without mesh and hood also SVT cams, gauge cluster 169K, wiper and turn signal switches, headlight switch, rattle can front fenders,early style shift cables,airbag control module, 2 front calipers one still on driver side spindle with strut and broken CV shaft, one KYB strut,SVT upper and lower intake manifold with throttle body, brake booster, master cylinder, dash-complete - including airbag, steering column including airbag, gas pedal and many more items including some from the 2004 3L Taurus engine I used in my swap, cop, valve covers, plastic uim & lim, stock 24lb 3L injectors, CSVT stock 19lb injectors (all 6 of both sets), a IMRC control box, CSVT stock exhaust manifolds with O2 sensors, 2 bolt y-pipe, wiper arms & blades, cowl covers, cabin filter frame, intake Hose(stock) with MAF, cruise control with throttle cable bracket, gear shafts from MTX75 with gears on them, rear roll reatrictor(stock), evap stuff from underneath trunk, fuel tank and hard plastic cover/guard(no pump assembly)
I am already in the process of stripping down the steel from the 2.5L engine block as well as the stock 2.5L cylinder heads to take them to the aluminum scrapper unless someone wants to make an offer on the heads...
I have until the end of the month to be able to store the items where they are at currently, after that I'm just gonna scrap it all so hopefully someone can use some of this pile of parts and whatever else you don't want/need maybe you will be able to sell it to someone else that does need it to repair their own CSVT or even to make a clone...
Hope everyone has a wonderful holiday season
~Jason