Control Arm

[fedfireguy]

Hey All, My rear lower control arm on the passenger side has a bend in it. Does not seem to affect performance but I feel I need to replace very soon. Any aftermarket versions available or stay with stock?? Also.. replace both sides while I'm at it??

Thanks for the Help!!

Ryan

 

[qbcsvt]

Im not sure but BOTH of mine are bent! I didnt seem to find anything aftermarket that was of better quality! So i went down to ford and bought them! 100 bucks 2gether! not a bad deal:shrug:!

Awaiting the day i do my rear subframe to do everything in 1 shot!

- Amyn 0532

 

[BrApple]

if the car is still aligned that it may not affect performance but it is best to get them replaced. there are some tubular ones out there but the stock ones work well ...

 

[loggerbomb]

if the car is still aligned that it may not affect performance but it is best to get them replaced. there are some tubular ones out there but the stock ones work well ...

and where by chance may these totally tubular ones be at?

 

[Blackcoog]

There was a guy over on NECO that had group buy going but I'm not sure what happened to it.

 

[KyleQ]

You can either try and look for the tubular ones, but the ones from Ford are a decent deal if you realize your getting a new balljoint as well as LCA bushings.

 

[BrApple]

and where by chance may these totally tubular ones be at?

bradness I do believe ...

 

[pimpdcontour]

bradness I do believe ...

yes that is where they come from. just pm him.