• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

gauge clustor for pillar

Yes mech is where the oil flows into the gauge.You can do that if you want just not safe that line is very small if you kink it your done..They do sell Elec oil pressure gauges.
 
Now remember theres 2 places to mount this sending unit.Behind the ac compressor or in the head there a hex nut you can take out and get some brass fitting and angle it out and mount your sensor there or for the one behind the ac comp you will have to run some copper lin up to the IMRC box area and mount it there i did the one on the head becasue it was the easiest and i still get a good enough reading..50-55 wot 25 at idle.When you go do any of this PM me i'll go to the hardware store and let you know what parts to get..You spend like 5bucks in part and get some hightemp thread locker from autozone or advanced auto.
 
No the oil temp will have a temp sending unit..the volts just goes to any switched 12V..I have not yet read about how people install the oil temp Read on the Old Forums for oil temp in the performance and general mods etc.
 
Not hard i removed the upper intake to do it just gave me some more room to work around..PM me when you got everything i'll give you my number call me up i'll help you out with anything you need..How to run the wires threw the firewall to hooking the wires up for the lighting.
 
Here i'll send you what you need to buy..Do you want the C2 that is the blue led backing or the ultralite series witch is the silver backing or the Phatom witch is the white?...
 
The C2 is a white back but the Phantom is more like the stock SVT gauges in your car.You can but a 3 pack of bulb condoms that go over the bulbs to make them light up blue but i didnt really like it to much.
 
It wasnt a bright blue and i could barely see the gauge..I would reccomend the phantom and get the covers there really cheap..like a few bucks..Heres the link to purchase
http://store.summitracing.com/partd...822101+4294765939+4294891600+115&autoview=sku
http://store.summitracing.com/partd...765939+4294891600+4294908418+115&autoview=sku
http://store.summitracing.com/partd...925228+4294923437+4294864283+115&autoview=sku

What other gauge did you wanna put in there??..Water temp or oil temp..or somthing else Wideband o2??
 
Well i know how to do the pressure and volts gauge the oil temp you'll have to search on if you dont wanna do it you can have your mech thats going to do your supercharger do it.But for the pressure and volts you can have them done in about a day taking your time since you havent done anything like it before..Get some rolls of black white and red wires from lowes home depot I forget the gauge just bring your guage there and match up the size of wires to the closest.Your going to need some wire to runn.
 
You must log in or register to reply here.
Back
Top