Coolkuehl3
CEG'er
Just did it a week or two ago and its a simple project. I have the instructions printed out and will bring them along with the electrical connector needed. I can spare 15 minutes at the meet. 
-
Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.
You can register to join the community.
PRT meet 9/30/2006
- Thread starter Pole120
- Start date
Frosty
Hard-core CEG'er
Thats interesting :drool:
Mark-I can also help with the foglight mod if need be as my car has it done too (with the help of Josh...2nd mod i did to the car iirc)
Has anybody volunteered to bring the chicken?? You can't have a bbq without chicken!!
Suba Blu
Hard-core CEG'er
I want that mod done too but my car wont be there
BTW -- Brats and Hamburgers equate BBQ!!!!
BTW -- Brats and Hamburgers equate BBQ!!!!
Pole120
Addicted CEG'er
Well, right now all we have is brats and buns.........
We need chicken, burgers and BBQ sauce..
There's a grocery store not too far away from the shop, so needed items can be picked up, it'ld just be nice to to have to.
~Josh
Frosty
Hard-core CEG'er
Maybe thats what they call it where you live, but where i come from, they call brats and burgers a Fry Out. Not until you actually have something with BBQ sauce on it, does it become a BBQ
Suba Blu
Hard-core CEG'er
is there a bathroom on site? BBQ sauce is pretty messy mang!
Pole120
Addicted CEG'er
Suba Blu
Hard-core CEG'er
what if we have to shat? shop towels and simple green wont cut it LOL
Pole120
Addicted CEG'er
Wanna bet? :laugh:
There are some buisnesses in the area, but i'ld recomend dropping the kids off at the pool prior to coming out.
~Josh
Frosty
Hard-core CEG'er
Come on you wusses...if you gotta go, there's a field and some tree leaves:laugh:
ButtonPuncher
Veteran CEG'er
Anybody wanna buy a set of new front rotors? They are 260mm (non-SVT).
I bought a set of Brembro rotors from BAT for my rear disc swap. They accidentally sent me fronts. I painted them with black hi-temp paint. $50 for the pair if anyone is interested.
I've got a new Zetec pre-98 MAF (6-wire) if anyone is interested too.
BP
I bought a set of Brembro rotors from BAT for my rear disc swap. They accidentally sent me fronts. I painted them with black hi-temp paint. $50 for the pair if anyone is interested.
I've got a new Zetec pre-98 MAF (6-wire) if anyone is interested too.
BP
Coolkuehl3
CEG'er
I'll stop and get some chicken and BBQ sauce. I'll try to bring some moist towelette wipes for the sloppy eaters, too.
I might be raffleing off my slightly used 1995-1998 Contour/Mystique Haynes Repair Manual. Josh you know why.
I might be raffleing off my slightly used 1995-1998 Contour/Mystique Haynes Repair Manual. Josh you know why.
Pole120
Addicted CEG'er
No more Worldtour
MLuko
Veteran CEG'er
Suba Blu
Hard-core CEG'er
I think both sway bar links are busted on SVT #2 or at least I assume thats the clunking noise I hear back there..
if I get a set at work would someone install those suckers for me? pretty please?
I've got a new gauge pod too with indiglos that I bought already installed but I think the inverter is missing or they just cut the wires... I should probably open that box and take a look see... I might bring that too.
I wish I could bring my SVT though... so many little things I need help with..
if I get a set at work would someone install those suckers for me? pretty please?
I've got a new gauge pod too with indiglos that I bought already installed but I think the inverter is missing or they just cut the wires... I should probably open that box and take a look see... I might bring that too.
I wish I could bring my SVT though... so many little things I need help with..
blu_fuz
New Member Classroom vulture
Josh! I already said I was bringing the burgers! see previous posts... - JOE
I think both sway bar links are busted on SVT #2 or at least I assume thats the clunking noise I hear back there..
if I get a set at work would someone install those suckers for me? pretty please?
I've got a new gauge pod too with indiglos that I bought already installed but I think the inverter is missing or they just cut the wires... I should probably open that box and take a look see... I might bring that too.
I wish I could bring my SVT though... so many little things I need help with..
Make sure its the end links and not the sway bar MOUNTS that are broken. They break if you look at them or even think about them breaking.
Suba Blu
Hard-core CEG'er
we don't sell the a rear link kit at work.. I checked last night.. I do have 1 rear shackle in the garage that I bought for the Cougar from the Mercury Dealer that I never used...
I'll have to crawl under there to see what it might be, something is clunking over bumps and I'm sure its not the struts or the strut mounts and its rear only.
I'll have to crawl under there to see what it might be, something is clunking over bumps and I'm sure its not the struts or the strut mounts and its rear only.
Look first don't assume. These cars are a PITA when it comes to squeaks and clunks. Then again headers and trubendz takes care of that problem! NO kitty pipe just makes more problems....
Frosty
Hard-core CEG'er
I thought you were bringing brats too!?! You can't get all the stuff lol. If nobody else pipes up before Saturday, i'll go and get them when i get down there. Sorry to hear about the tourI'll stop and get some chicken and BBQ sauce. I'll try to bring some moist towelette wipes for the sloppy eaters, too.
I might be raffleing off my slightly used 1995-1998 Contour/Mystique Haynes Repair Manual. Josh you know why.