• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

SVTOA autocross, SAT 4/21

turbo_fox

Veteran CEG'er
Joined
Nov 10, 2005
Messages
939
Location
wales ma
if anyone wants to come up and check it out, it runs all day


Directions - The Devens Airstrip is located off the Bishop Road gate in Ayer, a little north
of Route 2 and West of Route 495. Both directions converge at a Rotary in Ayer
at the junctions of routes 110, 111, and 2A. There is a Ford dealer (Gervais), a
Wendy's, and a McDonald's at this rotary.

From Route 495:

Take exit 30, route 2A and 110, West toward Ayer. Proceed 4 miles to rotary.

From Route 2:

Take exit 38B, route 110 and 111, North toward Ayer. Proceed 2 1/4 miles to
rotary.

From the rotary, proceed west on routes 2A and 111. This will take you to Ayer
center, and at about one mile routes 2A and 111 turn right; so will you. Proceed
one half mile to Bishop Road on the left. There are a Dunkin Donuts and a
Cumberland Farms along this half-mile. Landmarks for Bishop Road include a
sandwich board sign for Park Street Garage, electrical sub station, and a fancy
wood sign for the Ayer Animal Hospital. You can find Bishop road in Ayer @
maps.yahoo.com.

On Bishop Road you will pass a cemetery, a railroad line and then a chain link
gate. You are now on the former Fort Devens. About 1/2 mile in there is a fork
in the road where you will turn right (should be autox signs), then continue to
bear right onto a dirt road which enters the airstrip. Registration and waivers
are done at this entrance and the first runway is the paddock. NOTE the *only*
services available at the site are porta-potties.
 
not sure that I could make it saturday have some work to do on my cars at my parents house this weekend ...


but I added the link to this thread to the events stickie
 
Im sure John and CJ will be there, let me see if Im working that day or not so that I could tag along in the Z06
 
Im sure John and CJ will be there, let me see if Im working that day or not so that I could tag along in the Z06


yeah they will be there. You may not want to tag along, you may want to drive. you dont want to get stuck there all day. it goes from like 7am til 5pm.
 
I was talking to CJ and he said your not brining the stang!!?! Come on now I wanted to see it! But I wouldnt have made it anyways, Im working :(
 
I was talking to CJ and he said your not brining the stang!!?! Come on now I wanted to see it! But I wouldnt have made it anyways, Im working :(

its still not done! still to do:

fuel tank
fuel lines
intake (upper and lower)
fuel rails
injectors
headers
turbos
downpipes
plug wires


its taking forever!!!
 
Yea im working tomorrow so I wont make it, I am actually preparing Johns Z06 (detailing it) for tomorrow so that he could ruin it again :(
 
Back
Top