• Welcome to the Contour Enthusiasts Group, the best resource for the Ford Contour and Mercury Mystique.

    You can register to join the community.

finally an awd contour build

I put it in my living room so when I wake up I stare at it while I drink my coffee. And think about sanding🤣BDFF38AD-1575-4727-9922-9103CD20FA96.jpeg
 
In the daylight! Time to clean inside it and make the throttlebody hole larger to match the truck one I got9CC0B450-F4C8-4B60-96BE-0964B987A738.jpeg
 
looking at the details to the oil cooler and electric water pump setup… my goal is to Finnish all the engine bay stuff and move on to wiring and pedal box.
 
  • Like
Reactions: TGO
Little delay on the build, will be back later when it gets warmer I’m getting to old for working in the cold and rain
 
Dude fixing my contour now ! Been sitting for years but finishing it because of you! Can't wait to catch up to your level of build and co check you on some races! Keep it up!

Btw live near" icysvt former member on here" and near Bristol NASCAR speedway if your ever in the area!

Btw what fender flares are those and where do I get them?
 
constrosity said:
Dude fixing my contour now ! Been sitting for years but finishing it because of you! Can't wait to catch up to your level of build and co check you on some races! Keep it up!

Btw live near" icysvt former member on here" and near Bristol NASCAR speedway if your ever in the area!

Btw what fender flares are those and where do I get them?
Click to expand...
Front flare is factory mk1 mondeo spats. The rear is custom by one of the mondeo dudes, this is the only set in the usa
 
Don't get on here much, cant believe i haven't heard of this yet. This is insane!!!! Cant believe someone is finally making it happen.
 
Hey I saw the transmission build on here but quick question! If I have a 1998.5 transmission would it work with the transfer case from the Jaguar and also is there any way I could get a quote for a turbo kit or at least the custom wrapped AWD setup piping you have ? Because I'll have cash but really lacking in the custom fabbers department... I've decided to finish the engine and base transmission with zetec final drive and a turbo kit(hopefully from your people if possible) btw I was hoping for your opinion on this, but what is the best ECU or tuning equipment to use with the contour or that your using??? Didn't see any on that in the posts. Sorry if I missed it
 
Also what is your power range your looking at with your build and any suggestions other than pistons and rods on my engine to get somewhere past 599-900 HP? Btw love your build again and hope I can drive to wherever your first event is where your track racing it. If you don't mind showing info would like to maybe meet up and join the bracket myself.
 
You must log in or register to reply here.
Back
Top